DEAERATOR SYSTEMS - SPRAY AND TRAY
 
The Superior Boiler Works Deaerator Systems are Complete Packaged Systems, designed, built and stamped in accordance with the ASME code for 50 PSIG.

Constructed with all stainless steel direct contact internal vent condenser, all stainless steel adjustable spray valve(s) and a 10 minute minimum storage capacity.

Standard Spray and Tray designs incrementally sized from 3,500 up to 300,000 lbs. per hour. Standard sizes will adequately cover most boiler sizes and operating pressures up to 250 psig. Larger sizes are available upon request.

STANDARD EQUIPMENT INCLUDES:

Benefits Structural Steal Stand
Benefits Feed-pump(s) each with Suction Piping with Vortex Breaker, Shutoff Valve, Strainer, and flexible Connector. (Bypass Orifice(s) are supplied when required)
Benefits High Temp Return (>2270 F)
Benefits Medium Temp Return (1800 - 2270 F)
Benefits Low Temp Return (<1800  F)
Benefits Self-Controlled Pilot Operating Steam Pressure Reducing Valve
Benefits Mechanical Water Inlet Control Valve with External Float Cage
Benefits Storage Section Thermometer
Benefits Steam Section Pressure Gauge
Benefits Water Inlet Pressure Gauge
Benefits Full Height Water Sight Gauge(s)
High Level Alarm Switch
Low Level Alarm Switch
Benefits Manual Vent Valve with Orifice
Benefits Overflow Drainer
Benefits Sampling Valve
Benefits Full Capacity Pressure Relief Valve
Benefits Vacuum Breaker
Benefits Vessel Drain Connection
Benefits NEMA 1 Control Panel
Benefits Chemical Injection Quill
Benefits 12" x 16" Manway
Benefits Panel Mounted Gauges

 

Guaranteed Oxygen removal in excess of 0.005 cc/liter.
Guaranteed to eliminate titratable free carbon dioxide to 0.
Guaranteed to deaerate at all loads from 3% to 100% of rated capacity.
Guaranteed to heat water to corresponding temperature of the saturated steam contained within the vessel.


Quality
  • Safety
  • Exceptional Value
 Specifications and Drawings:
Spray Design / Tray Design

Superior Boiler Works, Inc. - ©Copyright 2008-2009 - All Rights Reserved